現在在庫切れです。
この商品の再入荷予定は立っておりません。
お届け先を選択

TacDraw カメラホルダー、W/アルカスイス　クイックリリースプレート付き

5つ星のうち3.0 1
安心・安全への取り組み
お客様情報の保護
安心・安全への取り組み
Amazonは安心・安全のために取り組んでいます。ストレスや不安なくお買い物いただくため、商品の返品対応やカスタマーサポート、信頼性のあるカスタマレビューのための健全なコミュニティの運営、お客様のプライバシーの保護などに取り組んでいます。また配送、梱包、製品、物流拠点などさまざまな面で、サステナブルな未来への取り組みを進めています。 詳細はこちら
お客様情報を保護しています
Amazonはお客様のセキュリティとプライバシーの保護に全力で取り組んでいます。Amazonの支払いセキュリティシステムは、送信中にお客様の情報を暗号化します。お客様のクレジットカード情報を出品者と共有することはありません。また、お客様の情報を他者に販売することはありません。 詳細はこちら
現在在庫切れです。 在庫状況について
この商品の再入荷予定は立っておりません。
  • 軽量で人間工学に基づいたtacdrawホルスターは、お使いのカメラを快適かつ安全な運ぶ方法を提供します。
  • カメラの重量をお尻にかけることにより、首と肩を解放します。
  • 二段階固定式により、あなたのカメラをしっかり付けることができます。
  • 撮影以外の時、カメラをtacdrawに収納して、両手をフリーにさせましょう。
  • tacdrawのクィックリリースプレートはarca-swissにも対応しています。
アマゾンに出品しませんか？:
アマゾンに買い物に訪れる何億人ものお客様にご自身のブランドの商品をお届けいただけます。
FBAなら配送からカスタマーサービスまでアマゾンにおまかせ。
今なら新規出品者様向け特典で最大787.5万円還元
Amazonで販売を開始する

商品の情報

詳細情報

登録情報

ご意見ご要望

TacDraw

TacDraw カメラホルダー、W/アルカスイス　クイックリリースプレート付き

さらに安い価格を見つけられた場合は、当サイトまでお知らせください。お客様からの情報を参考にして、さらにリーズナブルな価格でご提供できるよう努力します。

さらに安い価格はどこでご覧になりましたか？
/
/
/
/
フィードバックを提供するにはサインインしてください。

特定の情報をお探しですか?

商品の説明

コンパクトなデザインを持つtacdrawは、従来のカメラを運ぶ製品の短所を克服し、カメラホルスターのイノベーションを起こしています。 元々軍用の武器のホルスターのデザインを利用して、カメラを快適に長く持ち続けることを実現しました。 軽量の一眼レフ、ミラーレスカメラなど５lbsの重さまで対応します。 いち早くカメラを取り出すことができますので、撮りたい瞬間を逃さないです。 コンパクトなデザインを持つtacdrawは、気楽にカメラを持ち続ける方法を提供します。もちろん、あなたはいつでも簡単にカメラを取り出せます。 tacdrawパドルは体にフィットするように設計されています。 従来、カメラを運ぶ時、ストラップを使うのは最も一般的な方法です。 但し、ストラップを使う場合、カメラの重量を全部首と肩にかけています。 カメラの重量をお尻にかけることにより、首と肩をリラックスさせます。 二段階ロックの仕組みにより、あなたのカメラを正しい位置に固定させます。 いつでも簡単にカメラを取り出すことができます。 二段階ロックの仕組みにより、カメラの落下をしっかり防止します。 クィックリリース クィックリリースプレートはゴム付きで、通常撮影時のカメラの滑りを防止できます。 Dリングに他のパーツを付けることができます。Arca-Swiss の三脚にも対応しています。 クィックリリースプレート クィックリリースプレートはArca-Swissにも対応していますので、tacdrawホルスターと三脚の切り替えは非常に簡単です。

カスタマーレビュー

星5つ中3つ
5つのうち3つ
1グローバルレーティング

この商品をレビュー

他のお客様にも意見を伝えましょう
カスタマーレビューを書く

上位レビュー、対象国： 日本

黒兎爺
5つ星のうち3.0 まだ使用してません。
2018年6月22日に日本でレビュー済み
Amazonで購入
商品説明で大まかには使い勝手は理解して購入しました。まだ使用していないので使用後再レビューします。
役に立った
 レポート

他の国からのトップレビュー

すべてのレビューを日本語に翻訳
W Y MO
5つ星のうち3.0 Handy, but not dandy to use.
2017年9月2日にアメリカ合衆国でレビュー済み
Amazonで購入
Well, it seems like folks are buying this...not sure why no previous reviews?

Firstly... Manufacturer is not very clear about the material that the paddle is made from. Is it fiber reinforced... maybe or maybe not? It is flexible enough to make dawning on and off waist belts somewhat easy, but pulling on it too much, I would not recommend it. The 5 pound limit... given the amount of flex allowed, I would say that it will come apart at greater than 15 pounds force. If I'm wrong, then it should have been printed something about it...on the box, users manual or something? Can't find much on the web about it either, I would guess that the truth might turn-off potential buyers?

My thoughts on the product from the first day:
Does what it is supposed to...Holds my cameras. If you have a dSLR with a battery grip...bad idea due to fore mentioned 5 pound limit. The configuration of the holster puts the camera out much further from your body than the likes of a Spider system. This setup is best suited for working within an area, not optimal where travelling around is not needed. One could easily wack this hip mount against common objects such as gates, door knobs, chairs. Given the unknown strength of the connected joint between the paddle and mount lobe, I would worry that the material may fracture easily. I didn't find the holster too uncomfortable walking around, but sitting is another issue. Pulling it around to an angle help with sitting, but torque to the camera and joint may be an issue long term. I tested the implied quick draw design of the system and it is in reality a limited feature. I found I could one hand the release, but not consistently. The metal mounting system does seem solid, so no obvious issues found there. The camera plate has a generous big winged screw and does work well. When walking around and carefully, it still can generate some flopping/flexing from the joint of the paddle and again, not knowing the material is an issue. I may snake a safety tether on the back of the mount lobe and loop to my belt if I plan to do a long hike. Also, a bummer that you can't buy extra plates.

To sum up... It is good enough for small area use, but I'm not confident I could walk far with it. The stand off alone is going to limit my use as it seems very likely to snag on plants and gates. Couldn't quickly get in and out of a car for the "action situations" as the video promo hints.
I'll keep trying it out and see. Will update.
12人のお客様がこれが役に立ったと考えています
 レポート
Michael P
5つ星のうち1.0 Vastly disappointed with lack of ease and functionality.
2020年3月10日にアメリカ合衆国でレビュー済み
Amazonで購入
My recent amazon purchase of the “TacDraw Camera Belt Metal Holster: Waist Clip Holder for Pro DSLR Mirrorless Point & Shoot” was quite disappointing. The manufacture’s product design idea was imaginative and creative; for example, inside-the-pants paddle both spreads the lateral weight/load force against the thigh as well as preventing the holster receiver from lifting the belt/pants when drawing the camera from the holster receiver.
But the actual design was poor and dysfunctional at several levels. First, the space between the in-pants paddle and the outside-the-belt plastic retainer is far too close together for ease of inserting inner-paddle inside the pants. It took me 15-minutes to finally get it attached correctly. I had to bend (flex) the outer belt receiver housing significantly with lots of force to get it over the belt; I was afraid breaking the outer belt-clip housing with a 30-degree flexing to fit over belt. There should be more space engineered between the paddle and the outer over-the-belt clip.

Secondly, it was difficult to simultaneously depress the “safety release” button along with the secondary final release lever. And must be done with two hands simultaneously. More often than not I couldn’t get it to work with ease. My suggestion: Make the release lever longer and more pronounced. That’s the point of the safety button which doesn’t allow the release level to accidentally release camera mount plate in holster. The release lever had to be pressed firmly even after the safety button was depressed. Too much over kill in design. Once the safety button is depressed, the release lever should be super easy to press, since the depression of the safety button indicates you are ready to release camera from holster. If this same design was transitioned for a Glock holster, you’d be dead before you could draw your weapon.

I could have designed the holster so that the left hand could easily and simultaneously press the safety button AND the release lever together with ease. While the right hand is grasping camera body to withdraw it from holster in one quick smooth motion.

Also, because of the angle of the inner paddle from the required flexing of the belt-side clip ousing, a long camera lens would be rubbing against your leg when you are walking. But the bigger issues are the problem of mounting on the belt and inside pants hip AND the difficulty releasing camera from holster. The appearance is beautiful and compact, the multi-angle design of the camera body clip was inventive, and the idea was great --- but the engineering and practical testing and/or quality control aspects leaves much to be desired.

Lastly, The fact that extra camera mounts aren’t available makes it hard the interchange different cameras without un-mounting and re-mounting the plate each time. So likewise, I assume that spare repair parts are also unattainable. And I could not find any info or contact numbers for the manufacturer. In addition, from much experience. I have become very wary of Chinese plastics used for making products, because too often they compromise making high-quality plastics in order to reduce production costs. Three of my Chinese-make camera cases (Pelican-type U.S. cases) had plastic failures and the majority of Chinese-make Go-Pro thumbscrews on my Go-Pro cams broke with minimal use. This is why I was cautious about flexing the plastic paddles too much.

After numerous attempts to try to make it work, I gave up and sent it back. And I defy anyone to field test this holster and honestly claim that it is easy and practical to attach to your waist/belt, and validate the smooth easily use. It is the best looking design in my opinion, but it simply defies working smoothly and easy. Before returning it, I entertained the idea of making several modifications on it to make it work better, but I was afraid that if I removed some of the plastic from the housing, the required flexing might cause the plastic material to break.
2人のお客様がこれが役に立ったと考えています
 レポート